Details

---

BUY AOZ8808DI-05 https://www.utsource.net/itm/p/8521364.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Voltage	VIN	2.7	-	5.5	V
Output Voltage	VOUT	-	0.5	-	V
Output Current	IOUT	-	1.5	2	A
Quiescent Current	IQ	-	35	-	μA	No load
Shutdown Current	ISD	-	0.1	-	μA
Operating Temperature	TOPR	-40	-	85	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions for AOZ8808DI-05

1. Input Voltage Setup:

   • Ensure the input voltage is within the range of 2.7V to 5.5V.

2. Output Configuration:

   • The output voltage is fixed at 0.5V. Connect the output directly to your load or subsequent circuit stages.

3. Current Handling:

   • The device can supply a typical output current of up to 1.5A with a maximum of 2A. Ensure that the load does not exceed this limit to avoid damage.

4. Powering the Device:

   • Apply power to the input pin and ensure it is stable before enabling the device.

5. Quiescent and Shutdown States:

   • In no-load conditions, the quiescent current will be approximately 35μA.
   • When in shutdown mode, the current draw drops to about 0.1μA.

6. Temperature Considerations:

   • Operate the device within an ambient temperature range of -40°C to 85°C.
   • Store the device in environments ranging from -65°C to 150°C.

7. Mounting and PCB Layout:

   • Follow standard PCB layout practices for low-noise and thermal management.
   • Place bypass capacitors close to the input and output pins for stability.

8. Safety Precautions:

   • Always use appropriate protection circuits such as fuses or current limiting resistors if needed.
   • Avoid exposing the device to temperatures outside its specified operating range to prevent damage.

(For reference only)