Details

---

BUY LTC1286CS8 https://www.utsource.net/itm/p/8597131.html

Parameter	Description	Conditions	Min	Typ	Max	Unit
Supply Voltage	Operating supply voltage range		2.7		5.5	V
Supply Current	Quiescent current	Normal operation		60		μA
Output Voltage Range	Output voltage swing	No load	0		VCC-1.4	V
Input Offset Voltage	Differential input offset voltage	VCM=Vref	-3		3	mV
Common Mode Rejection Ratio	Ability to reject common mode signals		80			dB
Power Supply Rejection Ratio	Ability to reject power supply variations		80			dB
Bandwidth	Small signal bandwidth	VOUT=1V p-p		10		kHz
Slew Rate	Maximum rate of change of output voltage			0.5		V/μs
Output Current	Short circuit output current limit				20	mA

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the specified range (2.7V to 5.5V). The device may not operate correctly outside this range.
2. Quiescent Current: The typical quiescent current is 60μA. Keep this in mind for power budget considerations, especially in battery-powered applications.
3. Output Voltage Range: The output can swing from 0V to VCC-1.4V under no load conditions. Design your circuit considering these limits.
4. Input Offset Voltage: This parameter affects accuracy. Ensure that any error due to offset voltage is within acceptable limits for your application.
5. Common Mode Rejection Ratio (CMRR): High CMRR ensures that common-mode signals are effectively rejected, which is crucial for differential measurements.
6. Power Supply Rejection Ratio (PSRR): High PSRR means the device is less sensitive to power supply fluctuations, improving stability.
7. Bandwidth: For applications requiring fast response, ensure that the signal frequency does not exceed the small signal bandwidth.
8. Slew Rate: Important for large signal swings; the maximum slew rate is 0.5V/μs.
9. Output Current Limitation: The device can provide up to 20mA before going into current limiting. Avoid exceeding this limit to prevent damage.

For detailed specifications and additional information, refer to the official Linear Technology (now Analog Devices) datasheet for the LTC1286CS8.

(For reference only)