Details

---

BUY LTC6804IG-2#PBF https://www.utsource.net/itm/p/8598226.html
IC MONITOR BATT STACK 48SSOP

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Operating Voltage Range	VBAT	Continuous	2.5	-	5.5	V
Quiescent Current	IQ	All converters off	-	30	-	μA
Cell Measurement Accuracy	ΔVCELL	VCELL = 0 to 5 V	±10	-	-	mV
Cell Measurement Range	VCELL	Per cell	0	-	5	V
Communication Interface	SPI	Data Rate	-	1	-	Mbps
Temperature Range	Toper	Operating	-40	-	125	°C
Package Type			-	28-SSOP	-

Instructions for Use:

1. Power Supply Connection:

   • Connect the power supply to the LTC6804IG-2#PBF within the operating voltage range of 2.5V to 5.5V.

2. Cell Connections:

   • Ensure each cell connection is secure and within the measurement range of 0V to 5V.

3. Communication Setup:

   • Set up the SPI communication interface for data transfer. The typical data rate supported is 1 Mbps.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 125°C to ensure reliable performance.

5. Quiescent Current Awareness:

   • Be mindful of the quiescent current, which is typically 30μA when all converters are off, to manage power consumption effectively.

6. Accuracy Verification:

   • Verify that the cell measurement accuracy meets the requirement of ±10mV for accurate monitoring.

7. Handling Precautions:

   • Handle the 28-SSOP package with care to avoid damage to the pins and ensure proper soldering techniques are used during installation.

For detailed specifications and further instructions, refer to the official datasheet provided by the manufacturer.

(For reference only)