Details

---

BUY LTC6655BHMS8-4.096#PBF https://www.utsource.net/itm/p/8598250.html
IC VREF SERIES 4.096V 8MSOP

Parameter	Description	Value	Unit
Part Number	Full part number of the component	LTC6655BHMS8-4.096#PBF	-
Voltage Reference Output	Stable output voltage	4.096	V
Initial Accuracy	Accuracy at 25°C	±0.02	%
Temperature Coefficient	Change in output voltage per degree Celsius	±3	ppm/°C
Dropout Voltage	Maximum input-output voltage difference for regulation	1	V
Supply Current	Current consumed by the device	90	μA
Operating Temperature	Range of temperatures over which the device operates	-40 to 125	°C
Package Type	Physical package type	MSOP	-
Pin Count	Number of pins	8	-

Instructions:

1. Power Supply Connection: Ensure that the supply voltage is within the operating range specified and connect the power supply correctly to avoid damage.
2. Output Capacitor: Use a low ESR capacitor (e.g., ceramic) on the output to maintain stability. A typical value is 0.1 μF.
3. Input Capacitor: Place an input capacitor close to the device to minimize noise and transients. A 0.1 μF ceramic capacitor is recommended.
4. Thermal Considerations: Ensure adequate heat dissipation if operating near the maximum temperature limit.
5. Layout Guidelines: Follow good PCB layout practices, keeping traces short and wide to reduce parasitic inductance and resistance.
6. Storage and Handling: Store in a dry environment and handle with care to prevent damage from electrostatic discharge (ESD).

(For reference only)