Details

---

BUY LTC2365CTS8#TRPBF https://www.utsource.net/itm/p/8601101.html
IC ADC 12BIT SAR TSOT23-8

Parameter	Description	Specifications
Part Number	Linear Technology (now Analog Devices) ADC	LTC2365CTS8#TRPBF
Package Type	Package Style	TSSOP-16
Resolution	Resolution of the ADC	16 bits
Sampling Rate	Maximum Sampling Rate	200 kSPS (kilo Samples Per Second)
Supply Voltage	Operating Supply Voltage Range	2.7V to 5.5V
Interface	Digital Output Interface	SPI, CMOS Compatible
Input Type	Type of Input Supported	Differential, Pseudo-Differential
INL (Integral Nonlinearity)	Linearity Error	±2 LSB
DNL (Differential Nonlinearity)	Step Size Error	±1 LSB
SNR (Signal-to-Noise Ratio)	Ratio of Signal to Noise	94 dB (typical at 100 kHz input)
Power Consumption	Power Dissipation	24 mW (typical at 200 kSPS, VDD = 3.3V)
Operating Temperature	Temperature Range for Operation	-40°C to +85°C

Instructions for Use:

1. Power Supply: Ensure that the supply voltage is within the specified range (2.7V to 5.5V). Use bypass capacitors close to the power pins to reduce noise.
2. Clocking: Provide a stable clock signal to the CLK pin. The sampling rate should not exceed 200 kSPS.
3. SPI Communication: Configure the SPI interface correctly with appropriate settings for data transfer. Ensure that the CS (Chip Select) line is used properly to initiate and terminate communication.
4. Analog Inputs: Connect analog signals to the differential inputs. For single-ended operation, connect one input to a reference point.
5. Grounding and Layout: Pay attention to grounding practices and PCB layout to minimize noise and ensure accurate conversion.
6. Temperature Considerations: Operate within the specified temperature range to avoid performance degradation or damage.
7. Testing and Validation: After assembly, validate the functionality using known test signals to ensure proper operation.

For detailed design considerations and advanced configurations, refer to the datasheet available from the manufacturer's website.

(For reference only)