Details

---

BUY MAX1510ETB+T CONVERTER DDR 10TDFN https://www.utsource.net/itm/p/8603870.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating Range	2.7		5.5	V
Output Voltage	VOUT	Adjustable		0.6	3.6	V
Output Current	IOUT	Continuous			2.5	A
Switching Frequency	fSW			1.5		MHz
Efficiency	η	@ 3.3V IN, 1.8V OUT		85		%
Quiescent Current	IQ			2.5		mA
Shutdown Current	ISD			1		μA
Soft-Start Time	tSS			4		ms
Package Type				10	TDFN

Instructions for MAX1510ETB+T CONVERTER DDR 10TDFN:

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.7V to 5.5V to avoid damage to the device or reduced performance.

2. Output Voltage (VOUT) Setting:

   • Adjust the output voltage using external resistors according to the formula provided in the datasheet. The adjustable range is from 0.6V to 3.6V.

3. Output Current (IOUT):

   • The converter can provide up to 2.5A continuous output current. Ensure your load does not exceed this limit to prevent overheating and potential failure.

4. Switching Frequency (fSW):

   • Operates at a typical switching frequency of 1.5MHz. This high-frequency operation helps in reducing the size of external components like inductors and capacitors.

5. Efficiency (η):

   • For optimal efficiency, operate the converter with an input voltage of 3.3V and an output voltage of 1.8V. Typical efficiency is around 85%.

6. Quiescent Current (IQ):

   • Keep in mind that the quiescent current is typically 2.5mA. Design your power management system considering this static current consumption.

7. Shutdown Current (ISD):

   • When the converter is in shutdown mode, the current consumption drops to approximately 1μA, making it suitable for battery-powered applications.

8. Soft-Start Time (tSS):

   • The soft-start time is set to 4ms by default. This helps in preventing inrush currents during startup which could otherwise stress the components.

9. Package Type:

   • The converter comes in a 10-pin TDFN package, which is compact and ideal for space-constrained designs.

For detailed design considerations, application circuits, and troubleshooting tips, refer to the full datasheet available from the manufacturer's website.

(For reference only)