Details

---

BUY GM16C550 https://www.utsource.net/itm/p/8663448.html

Parameter	Description	Value/Range
Operating Voltage	Supply voltage range for the device	4.5V to 5.5V
Operating Temperature	Temperature range in which the device can operate	-40°C to +85°C
Data Rate	Maximum data rate supported by the device	Up to 1 Mbps
Communication Interface	Type of communication interface used by the device	UART (Universal Asynchronous Receiver-Transmitter)
Package Type	Physical package type of the component	TSSOP-20
Pin Count	Number of pins on the package	20
Logic Level	Input and output logic levels	TTL
Power Consumption	Typical power consumption	< 100 μA (standby), < 30 mA (active)

Instructions:

1. Power Supply: Ensure that the supply voltage is within the specified range of 4.5V to 5.5V to avoid damage to the GM16C550.
2. Temperature Considerations: Operate the device within the temperature range of -40°C to +85°C for reliable performance.
3. Communication Setup: Configure the UART settings according to your system requirements, ensuring baud rates do not exceed 1 Mbps.
4. Physical Installation: Mount the TSSOP-20 package on a suitable PCB with proper soldering techniques to ensure electrical connections are secure.
5. Power Management: Utilize the low-power standby mode to minimize power consumption when the device is not actively transmitting or receiving data.
6. Signal Integrity: Maintain clean signal lines for inputs and outputs to prevent noise interference, especially important at higher data rates.
7. Logic Levels Compatibility: Verify that the TTL logic levels of the GM16C550 are compatible with other components in your circuit to ensure proper communication.

(For reference only)