Details

---

BUY QM75DY-2H https://www.utsource.net/itm/p/8663538.html

Parameter	Description	Value
Part Number	Unique identifier for the component	QM75DY-2H
Type	Component category	MEMS Gyroscope
Interface	Communication interface type	I2C, SPI
Supply Voltage	Operating voltage range	1.71V to 3.6V
Output Data Rate	Frequency of data output	12.5Hz to 800Hz
Range	Angular rate measurement range	±125/±250/±500/±1000
Bandwidth	Signal processing bandwidth	Programmable
Power Consumption	Typical power consumption in active mode	0.6mA (typical)
Package	Physical dimensions and pin configuration	LGA-14
Operating Temp.	Temperature range for operation	-40°C to +85°C

Instructions:

1. Power Supply Connection: Connect the supply voltage within the specified range (1.71V to 3.6V). Ensure stable power supply to avoid data corruption.
2. Interface Selection: Choose between I2C or SPI interfaces as per your application requirements. Configure the necessary pins accordingly.
3. Initialization: Use the appropriate initialization sequence for the selected interface. Refer to the datasheet for specific commands.
4. Configuration: Set the desired output data rate and angular rate measurement range using the configuration registers.
5. Data Reading: Read the angular rate data from the output registers at the configured data rate.
6. Power Management: Utilize sleep or low-power modes when not actively measuring to conserve power.
7. Mounting Orientation: Ensure the device is mounted correctly according to the intended sensing axis orientation.
8. Environmental Considerations: Operate within the specified temperature range (-40°C to +85°C) for reliable performance.

(For reference only)