Details

---

BUY TEA6320T https://www.utsource.net/itm/p/8724604.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.5	5	5.5	V
Standby Current	ISB	VCC = 5V	-	1	2	mA
Operating Current	IOP	VCC = 5V, Typical Load	-	10	20	mA
Output Power	POUT	RL = 8Ω, VCC = 5V	-	100	150	mW
Signal Input Range	VIN		-	200	700	mVpp
Total Harmonic Distortion	THD	1 kHz, VCC = 5V	-	0.1	1	%
Frequency Response	fR	20 Hz to 20 kHz	-	-	-	Hz/kHz

Instructions for TEA6320T

1. Power Supply Connection:

   • Connect the supply voltage (VCC) between 4.5V and 5.5V to the VCC pin.
   • Ensure a stable power supply to avoid noise and distortion.

2. Signal Input:

   • Apply the audio signal to the input pins within the range of 200mVpp to 700mVpp for optimal performance.
   • Keep signal levels consistent to maintain sound quality.

3. Output Configuration:

   • Connect an 8Ω speaker or equivalent load to the output terminals.
   • Ensure proper impedance matching to achieve maximum power transfer and efficiency.

4. Standby Mode:

   • To reduce power consumption, use the standby mode by controlling the appropriate pin.
   • In standby, current consumption drops significantly to save energy.

5. Mounting and Layout:

   • Place the device on a PCB with adequate heat dissipation paths if operating at higher currents.
   • Maintain short leads and proper grounding to minimize noise and interference.

6. Operating Environment:

   • Operate the device within temperature ranges specified in the datasheet to ensure reliability.
   • Avoid exposing the device to excessive humidity or corrosive environments.

7. Testing:

   • Verify connections and settings before powering up the device.
   • Monitor the output for any signs of distortion or unusual behavior during initial testing.

(For reference only)