Details

---

BUY LC32V4265TL-25S-MPB https://www.utsource.net/itm/p/8724889.html

Parameter	Description	Value
Part Number	Full part number	LC32V4265TL-25S-MPB
Type	Type of component	LCD Module
Display Size	Size of the display	3.2 inches
Resolution	Display resolution	240 x 320 pixels
Interface	Communication interface	SPI
Color Support	Number of colors supported	65K colors
Backlight	Type of backlight	LED
Operating Voltage	Voltage required for operation	3.3V to 5V
Operating Temperature	Temperature range for operation	-20°C to +70°C
Storage Temperature	Temperature range for storage	-30°C to +80°C
Touch Panel	Touch panel type	Resistive touch screen
Controller IC	Integrated circuit used for control	ILI9341
Dimensions (W x H x D)	Width x Height x Depth dimensions	62.5 x 75.5 x 10 mm
Weight	Weight of the module	40g

Instructions:

1. Power Supply: Connect the power supply pins to a stable voltage source within the operating voltage range.
2. SPI Interface Setup: Ensure correct wiring of the SPI interface pins (MOSI, MISO, SCK, CS) according to your microcontroller or processor.
3. Backlight Control: The backlight can be controlled via a separate pin; connect this to a PWM output for adjustable brightness if needed.
4. Initialization: Use initialization commands as specified in the controller IC datasheet (ILI9341).
5. Touch Panel Calibration: Calibrate the resistive touch panel using a calibration routine in your software.
6. Handling Precautions: Handle with care, avoiding exposure to extreme temperatures and moisture.
7. Mounting: Secure the module using the mounting holes provided, ensuring it is stable and not subjected to excessive force.

(For reference only)