Details

---

BUY MCC312-18io1 https://www.utsource.net/itm/p/8800607.html

Parameter	Description	Value/Details
Model Number	Model identification	MCC312-18IO1
Input Channels	Number of analog input channels	12
Resolution	ADC resolution	16-bit
Sample Rate	Maximum sample rate per channel	Up to 200 kS/s
Input Range	Voltage range for analog inputs	±10 V
Isolation	Channel-to-channel and channel-to-ground isolation	2500 Vrms
Digital I/O	Number of digital I/O lines	6
Power Supply	Operating voltage	5 V DC
Current Draw	Typical current consumption	100 mA
Operating Temp.	Temperature range for operation	-40°C to +85°C
Dimensions	Product dimensions (LxWxH)	100 mm x 60 mm x 20 mm
Weight	Product weight	100 g

Instructions:

1. Power Connection: Connect the device to a stable 5V DC power supply. Ensure the power supply can provide sufficient current as specified.
2. Analog Input Configuration: Connect your analog signals to the appropriate input channels. Verify that the signal levels are within the supported input range of ±10 V.
3. Digital I/O Setup: Configure the digital I/O lines according to your application requirements. Refer to the programming manual for detailed setup instructions.
4. Software Installation: Install the provided software drivers and configuration tools on your computer. This will allow you to set up and control the MCC312-18IO1 via USB or Ethernet.
5. Operation: Use the configuration software to set parameters such as sample rate, input range, and trigger conditions. Start data acquisition and monitor the results through the software interface.
6. Safety Precautions: Always ensure that the input voltages do not exceed the specified limits to prevent damage to the device. Handle the device with care to avoid physical damage.

(For reference only)