Details

---

BUY 3043505 https://www.utsource.net/itm/p/8832684.html

Parameter	Value	Unit
Part Number	3043505	-
Description	Relay	-
Coil Voltage	24	VDC
Coil Current	10	mA
Contact Form	SPDT	-
Contact Rating	10A @ 250VAC	-
Insulation Resistance	1000	MΩ
Dielectric Strength	1500	VAC
Operating Temperature	-40 to 85	°C

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that maintains an ambient temperature within the operating range.
   • Secure the relay using the mounting holes provided.

2. Wiring:

   • Connect the coil terminals to the appropriate control voltage source.
   • Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to the circuit requirements.

3. Operation:

   • Apply the rated coil voltage to energize the relay, which will switch the contacts from NC to NO.
   • Remove the voltage to return the contacts to their default state.

4. Maintenance:

   • Periodically inspect connections for tightness and signs of wear.
   • Ensure environmental conditions do not exceed the specified operating parameters.

(For reference only)