Details

---

BUY L6282-3.2E https://www.utsource.net/itm/p/8840892.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5		30	V
Output Current	Iout	Continuous		1.5	2	A
Quiescent Current	Iq	Vcc = 5V		6		mA
Dropout Voltage	Vdo	Iout = 1A, Vcc = 5V		0.7		V
Thermal Shutdown	TSD			160		°C
Operating Temperature	Topr		-40		85	°C

Instructions for L6282-3.2E

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to the input pin.
   • Ensure the supply voltage is within the operating range of 4.5V to 30V.

2. Output Configuration:

   • The output pin provides a regulated output current up to 2A continuous.
   • For optimal performance, ensure the load does not exceed the maximum output current rating.

3. Thermal Considerations:

   • The device includes thermal shutdown protection which activates at approximately 160°C.
   • Ensure adequate heat sinking if operating near the upper limits of current and temperature.

4. Operating Environment:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Avoid exposing the device to temperatures exceeding the maximum operating limit to prevent damage.

5. Quiescent Current:

   • At a supply voltage of 5V, the quiescent current is typically 6mA.
   • This value should be considered in low-power applications.

6. Dropout Voltage:

   • When supplying 1A at an input voltage of 5V, the dropout voltage is typically 0.7V.
   • Ensure that the input voltage is sufficiently higher than the desired output voltage to maintain regulation.

Note: Always refer to the manufacturer's datasheet for the most accurate and detailed specifications and application notes.

(For reference only)