Details

---

BUY VNH3ASP30 https://www.utsource.net/itm/p/8842781.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.5	-	28	V	Operating voltage range
Logic Supply Voltage	VLOGIC	1.8	-	5.5	V	Operating voltage range for logic inputs
Continuous Current	Icont	-	30	-	A	Continuous current per channel
Peak Current	Ipeak	-	60	-	A	Peak current per channel (10 ms pulses)
Thermal Shutdown	TSD	-	170	-	°C	Thermal shutdown temperature
Under Voltage Lockout	UVLO	4.0	-	-	V	Under-voltage lockout threshold
Output Low Voltage	VOL	-	0.4	-	V	Output low voltage at Icont
Power Dissipation	PD	-	-	10	W	Maximum power dissipation (TA = 25°C)

Instructions for Use:

1. Supply Voltage (VCC): Ensure the supply voltage is within the range of 4.5V to 28V.
2. Logic Supply Voltage (VLOGIC): Connect a separate logic supply if needed, ensuring it is between 1.8V and 5.5V.
3. Continuous Current Handling: The device can handle up to 30A continuously per channel. For peak currents up to 60A, use 10ms pulses.
4. Thermal Management: Monitor the temperature to avoid exceeding 170°C, which triggers thermal shutdown.
5. Under Voltage Protection: The device will not operate below 4.0V due to under-voltage lockout protection.
6. Output Configuration: When operating at continuous current, the output low voltage should be around 0.4V.
7. Power Dissipation: Keep the power dissipation below 10W at an ambient temperature of 25°C to ensure reliable operation.

(For reference only)