Details

---

BUY MC74HC595ADR2G https://www.utsource.net/itm/p/8844424.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Output Current (Source)	IOL	IO = L, TA = 25°C	-	7	35	mA
Output Current (Sink)	IOH	IO = H, TA = 25°C	-	7	35	mA
Storage Temperature Range	Tstg		-65	-	150	°C
Operating Temperature Range	Topr		-40	-	85	°C
Input Capacitance	CIN	f = 1 MHz	-	9	-	pF
Propagation Delay Time	tpd	VCC = 4.5V to 5.5V	0	64	100	ns
Power Dissipation	PD	Continuous	-	-	100	mW

Instructions for MC74HC595ADR2G:

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the range of 2.0V to 6.0V.
   • Ensure the GND pin is connected to ground.

2. Data Input and Shift Register Clock:

   • Apply data to the DS (Data Serial) pin.
   • Use the SH_CP (Shift Register Clock Pin) to shift data into the register on each rising edge.

3. Storage Register Clock:

   • Use the ST_CP (Storage Register Clock Pin) to transfer data from the shift register to the storage register on the rising edge.

4. Output Enable:

   • Set OE (Output Enable) low to enable the output drivers; set high to disable them.

5. Clear Function:

   • The MR (Master Reset) pin can be used to clear the shift register when pulled low.

6. Operating Temperature:

   • Ensure the device operates within the temperature range of -40°C to +85°C for reliable performance.

7. Handling Precautions:

   • Avoid exceeding the maximum ratings specified in the table.
   • Follow proper handling procedures to prevent damage from electrostatic discharge (ESD).

8. Propagation Delay:

   • Be aware of the propagation delay time when designing timing circuits to ensure proper synchronization.

9. Mounting and Storage:

   • Store the device in an environment with temperatures between -65°C and 150°C.
   • Handle with care during mounting to avoid mechanical stress on the pins.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)