Details

---

BUY SN74ACT86DR https://www.utsource.net/itm/p/9005950.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	1.65	-	3.6	V
Propagation Delay Time	tPD	-	2.8	-	ns	VCC = 3.3V, TA = 25°C
Power Dissipation	PD	-	-	100	mW	Per Package
Operating Temperature	Toper	-40	-	85	°C
Storage Temperature	Tstg	-65	-	150	°C
Input Low Voltage Level	VIL	-	0.8	-	V	VCC = 3.3V
Input High Voltage Level	VIH	-	2.0	-	V	VCC = 3.3V
Output Low Voltage Level	VOL	-	0.2	-	V	IO = 32mA, VCC = 3.3V
Output High Voltage Level	VOH	-	2.9	-	V	IO = -8mA, VCC = 3.3V

Instructions for SN74ACT86DR

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the specified range (1.65V to 3.6V).
   • Ensure the GND pin is properly grounded.

2. Signal Integrity:

   • Keep signal traces as short as possible to minimize noise and crosstalk.
   • Use decoupling capacitors close to the VCC and GND pins to stabilize the power supply.

3. Operating Environment:

   • Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.
   • Store the device in an environment between -65°C and 150°C when not in use.

4. Input and Output Handling:

   • Ensure input signals do not exceed the voltage levels defined by VIL and VIH to prevent damage or erratic behavior.
   • Outputs should be connected to loads that can handle the specified current levels for VOL and VOH.

5. Propagation Delay:

   • Account for the propagation delay time (tPD) in your timing calculations, especially in high-speed applications.

6. Handling Precautions:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Follow proper soldering techniques to prevent thermal stress on the component.

This table and set of instructions provide essential information for effectively using the SN74ACT86DR in your designs.

(For reference only)