Details

---

BUY SN74AHC1G08DCKR https://www.utsource.net/itm/p/9006357.html

Parameter	Min	Typical	Max	Unit	Conditions
Supply Voltage (VCC)	1.65		5.5	V
Input Low Voltage (VIH)			0.8	V	VCC = 2.0V
Input High Voltage (VIL)	0.8			V	VCC = 2.0V
Output Low Voltage (VOH)			0.1	V	IO = -4mA, VCC = 4.5V
Output High Voltage (VOL)	4.4			V	IO = 16mA, VCC = 4.5V
Propagation Delay (tpd)		7	11	ns	VCC = 4.5V, TA = 25°C
Power Dissipation			300	mW	Per package

Instructions for SN74AHC1G08DCKR:

1. Power Supply Connection: Connect the supply voltage (VCC) between 1.65V and 5.5V to the VCC pin and GND to the ground pin.
2. Input Signal Levels: Ensure input signals are within specified VIH and VIL levels relative to the supply voltage.
3. Output Load Considerations: Design circuits ensuring output currents do not exceed the maximum ratings to avoid damage.
4. Propagation Delay Awareness: Account for a typical propagation delay of 7ns at VCC = 4.5V when timing your circuit.
5. Thermal Management: Keep power dissipation within limits to prevent overheating. Use appropriate heat sinking if necessary.
6. Handling Precautions: Handle the device with care to avoid ESD damage; use proper anti-static measures.

Note: Always refer to the latest datasheet from the manufacturer for the most accurate and detailed specifications and guidelines.

(For reference only)