Details

---

BUY M51182L https://www.utsource.net/itm/p/9088832.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	-	5.5	V
Input Voltage Range	Vin		0	-	Vcc	V
Output Voltage	Vout	No Load	-	Vcc	-	V
Output Current	Iout	Continuous	-	100	-	mA
Quiescent Current	Iq	Vcc = 5V	-	5	-	mA
Dropout Voltage	Vdo	Iout = 100mA	-	0.5	-	V
Power Dissipation	Pd	TA = 25°C	-	625	-	mW
Operating Temperature	Topr	Storage	-40	-	85	°C

Instructions for M51182L:

1. Power Supply Connection: Connect the supply voltage (Vcc) between 4.5V and 5.5V to the input pin. Ensure a stable power source to avoid fluctuations.
2. Input Protection: Ensure that the input voltage does not exceed the maximum supply voltage to prevent damage to the device.
3. Output Configuration: The output pin can deliver up to 100mA of current continuously. Connect the load directly to the output pin.
4. Thermal Management: For applications requiring higher current or prolonged operation, ensure adequate heat dissipation to keep the operating temperature within specified limits.
5. Quiescent Current Consideration: The quiescent current is around 5mA at 5V supply, which should be accounted for in low-power designs.
6. Dropout Voltage Awareness: The dropout voltage is approximately 0.5V at full load, which means the input voltage should be at least 0.5V higher than the desired output voltage.
7. Temperature Range: The device operates reliably between -40°C and 85°C. Avoid exposing the device to temperatures outside this range.

For detailed specifications and advanced applications, refer to the manufacturer's datasheet.

(For reference only)