Details

---

BUY MCP130T-315I/TT https://www.utsource.net/itm/p/9105144.html

Parameter	Description	Value
Part Number	Device Identifier	MCP130T-315I/TT
Package Type	Encapsulation Type	TO-220
Output Voltage (Vout)	Regulated Output Voltage	3.15V
Input Voltage Range	Minimum to Maximum Input Voltage for Stable Operation	4.75V to 40V
Quiescent Current	Current Consumed by the Device During Normal Operation	65μA (Typical)
Output Current (Iout)	Maximum Continuous Output Current	1.5A
Line Regulation	Change in Output Voltage Due to Variations in Input Voltage	±0.5%
Load Regulation	Change in Output Voltage Due to Variations in Load	±0.5%
Ripple Rejection	Ability to Suppress Ripple from the Input Voltage	70dB (120Hz)
Operating Temperature	Temperature Range for Reliable Operation	-40°C to +125°C
Storage Temperature	Temperature Range for Storage Without Damage	-65°C to +150°C
Dropout Voltage	Minimum Difference Between Input and Output Voltage for Regulation	1.2V (Max at Iout)

Instructions:

1. Installation: Ensure that the device is mounted on a suitable heatsink if operating near maximum output current to maintain optimal performance.
2. Input Filtering: Use appropriate input capacitors to filter out noise and provide stable operation. A minimum of 0.33μF ceramic capacitor is recommended.
3. Output Filtering: Connect an output capacitor (e.g., 10μF tantalum or electrolytic) close to the regulator to ensure stability and reduce ripple.
4. Heat Management: Monitor the junction temperature to avoid exceeding the maximum operating temperature. Adequate ventilation or additional cooling may be necessary.
5. Polarity Check: Verify correct polarity before applying power to prevent damage to the device.
6. Power-On Sequence: Apply input voltage slowly to avoid inrush currents which can cause transient issues.
7. Load Testing: Test with actual load conditions to ensure the regulator meets the system requirements under all operating scenarios.

(For reference only)