Details

---

BUY 1SR154-600 TE25 https://www.utsource.net/itm/p/9163311.html

Parameter	Value	Unit
Part Number	1SR154-600 TE25	-
Type	Surge Protection Device	-
Maximum Discharge Current (8/20μs)	15kA (Single Pulse)	A
Voltage Protection Level (Up to 8/20μs)	600V	V
Clamping Voltage (Up to 8/20μs)	1200V	V
Operating Temperature Range	-40°C to +85°C	°C
Response Time	< 1ns	ns
Terminal Type	Threaded Stud	-
Mounting Style	Through Hole	-
Standards Compliance	IEC 61643-1, UL 1449	-

Instructions for Use:

1. Installation:

   • Ensure the device is installed in a location that adheres to the operating temperature range.
   • Secure the threaded stud firmly into the designated position on your equipment.

2. Connection:

   • Connect the device according to the circuit diagram provided by the manufacturer or system designer.
   • Verify all connections are tight and secure to prevent any electrical hazards.

3. Testing:

   • After installation, perform a continuity test to ensure proper connection.
   • Regularly inspect the device for signs of damage or wear.

4. Maintenance:

   • Periodically check the installation site for environmental changes that may affect performance.
   • Replace the device if it has experienced a surge event exceeding its rated capacity or shows physical damage.

5. Safety Precautions:

   • Always disconnect power before handling the device.
   • Follow local electrical codes and safety regulations during installation and maintenance.

(For reference only)