Details

---

BUY P0603BK https://www.utsource.net/itm/p/9239211.html

Parameter	Description	Value	Unit
Part Number	Device Part Number	P0603BK	-
Input Voltage (Min)	Minimum input voltage	2.7	V
Input Voltage (Max)	Maximum input voltage	6	V
Output Voltage	Fixed output voltage	3.3	V
Output Current	Maximum continuous output current	600	mA
Efficiency	Typical efficiency at nominal conditions	90	%
Operating Temp (Min)	Minimum operating temperature	-40	°C
Operating Temp (Max)	Maximum operating temperature	85	°C
Package Type	Type of package	SOT-23	-
Pin Configuration	Pin configuration	VIN, GND, VOUT	-

Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage to the VIN pin.
   • Ensure the input voltage is within the specified range (2.7V to 6V).

2. Ground Connection:

   • Connect the GND pin to the system ground.

3. Output Connection:

   • The VOUT pin provides a regulated 3.3V output. Connect this to the load or downstream circuitry requiring this voltage.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current to avoid overheating.
   • Check that the ambient temperature does not exceed 85°C.

5. Capacitor Requirements:

   • It is recommended to place a ceramic capacitor (typically 1μF) close to the VIN and GND pins for stability.
   • An additional capacitor (1μF) should be placed between VOUT and GND for optimal performance.

6. Handling Precautions:

   • Handle with care to avoid damage to the device.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the component.

(For reference only)