Details

---

BUY CM16C450PE https://www.utsource.net/itm/p/9239281.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	-	4.5	-	5.5	V
Operating Temperature	Topr	-	-40	-	85	°C
Storage Temperature	Tstg	-	-65	-	150	°C
Input Voltage (High)	VIH	-	2.0	-	Vcc	V
Input Voltage (Low)	VIL	-	0	-	0.8	V
Output Voltage (High)	VOH	IO = -1mA	2.4	-	Vcc	V
Output Voltage (Low)	VOL	IO = 16mA	0	-	0.4	V
Input Leakage Current	IIL	VI = 0V, Vcc = 5V	-1	-	1	μA
Output Leakage Current	IOL	VO = 0V, Vcc = 5V	-1	-	1	μA
Propagation Delay Time	tpd	Vcc = 5V, Tamb = 25°C	-	9	-	ns
Power Consumption	ICC	f = 0 MHz	-	0.1	-	mA

Instructions for CM16C450PE

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) between 4.5V and 5.5V to pin Vcc.
   • Ensure a stable power supply to avoid unexpected behavior.

2. Operating Environment:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device in an environment ranging from -65°C to 150°C.

3. Input Signals:

   • Apply input signals with voltages between 0V and 0.8V for logic low.
   • Apply input signals with voltages between 2.0V and Vcc for logic high.
   • Ensure that input signals do not exceed Vcc or go below ground to prevent damage.

4. Output Signals:

   • For output high, expect voltages between 2.4V and Vcc when sourcing up to 1mA.
   • For output low, expect voltages between 0V and 0.4V when sinking up to 16mA.

5. Propagation Delay:

   • Expect a propagation delay time of approximately 9ns under standard conditions (Vcc = 5V, ambient temperature = 25°C).

6. Power Consumption:

   • The device consumes about 0.1mA when no switching activity is present (f = 0 MHz).

7. Handling Precautions:

   • Handle the component carefully to avoid electrostatic discharge (ESD) damage.
   • Follow proper PCB layout guidelines to ensure optimal performance.

8. Testing and Validation:

   • Before deploying the component in a final application, perform thorough testing to validate its operation under intended conditions.

(For reference only)