Details

---

BUY STMicroelectronics STF10N80K5 https://www.utsource.net/itm/p/9717491.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Drain-Source Voltage	VDSS		-	-	800	V
Gate-Source Voltage	VGS		-20		20	V
Continuous Drain Current	ID	Tc = 25°C	-	-	10	A
		Tc = 70°C	-	-	6.9	A
Pulse Drain Current	IDM	tp = 10 μs, repetitive	-	-	40	A
Gate Charge	QG		-	38	-	nC
Input Capacitance	Ciss	VDS = 30V, VGS = 0V	-	1500	-	pF
Output Capacitance	Coss	VDS = 30V, VGS = 0V	-	430	-	pF
Reverse Transfer Capacitance	Crss	VDS = 30V, ID = 0.5mA	-	260	-	pF
Threshold Voltage	VGS(th)	ID = 1 mA	2	4	6	V
On-State Resistance	RDS(on)	VGS = 10V, ID = 4.4A	-	0.85	-	Ω

Instructions for Use:

1. Storage and Handling:

   • Store in a dry place.
   • Handle with care to avoid damage to the leads and body.

2. Mounting:

   • Ensure proper heat sinking when operating at high currents or power levels.
   • Follow recommended PCB layout guidelines for optimal performance and thermal management.

3. Electrical Connections:

   • Connect gate to control circuitry using short leads to minimize parasitic inductance.
   • Ensure adequate decoupling capacitors are placed close to the device for stability.

4. Operating Conditions:

   • Do not exceed maximum ratings specified in the table.
   • Operate within safe operating area (SOA) limits provided in the datasheet.

5. Testing:

   • Use appropriate test equipment and methods as outlined in the datasheet for accurate characterization of the device parameters.

6. Safety Precautions:

   • Always disconnect power before making connections or adjustments.
   • Observe all standard safety practices when working with electrical circuits.

(For reference only)