Details

---

BUY M58477L https://www.utsource.net/itm/p/9785665.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	-	5.5	V
Input Voltage Range	Vin		0	-	Vcc	V
Output Current	Iout	Continuous	-	200	-	mA
Quiescent Current	Iq	Vcc = 5V	-	1	-	mA
Dropout Voltage	Vdo	Iout = 100mA	-	0.3	-	V
Load Regulation		Iout: 0 to 200mA	-	0.5	-	%
Line Regulation		Vcc: 4.5V to 5.5V	-	0.1	-	%
Ripple Rejection		120Hz, Vcc = 5V	-	60	-	dB

Instructions for Use:

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) within the specified range of 4.5V to 5.5V.

2. Input and Output Connections:

   • Ensure that the input voltage does not exceed the supply voltage.
   • The output current should not exceed 200mA continuously.

3. Quiescent Current Consideration:

   • Keep in mind that the quiescent current is typically around 1mA at a supply voltage of 5V.

4. Dropout Voltage Management:

   • Be aware that the dropout voltage is approximately 0.3V when the output current is 100mA.

5. Regulation Specifications:

   • The load regulation is typically 0.5% from no load to full load.
   • The line regulation is typically 0.1% over the specified supply voltage range.

6. Noise Reduction:

   • For optimal performance, ensure that the ripple rejection capability of 60dB at 120Hz is considered in noisy environments.

7. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near maximum output current to prevent overheating.

8. Capacitor Requirements:

   • Check the datasheet for specific recommendations on input and output capacitors to stabilize the regulator operation.

Note: Always refer to the official datasheet for the most accurate and detailed information.

(For reference only)