Details

---

BUY TC5037P https://www.utsource.net/itm/p/9820517.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating range	2.7	-	5.5	V
Output Current	Iout	Continuous	-	100	300	mA
Quiescent Current	Iq	Vout = 3.3V, no load	-	10	20	μA
Dropout Voltage	Vdo	Iout = 300mA	-	300	500	mV
Line Regulation		Vcc: 4.5V to 5.5V	-	0.01	0.03	%
Load Regulation		Iout: 0 to 300mA	-	0.01	0.03	%
Ripple Rejection		10Hz to 100kHz	60	70	80	dB

Instructions for TC5037P

1. Power Supply Connection: Ensure the input voltage (Vcc) is within the operating range of 2.7V to 5.5V.
2. Output Configuration: Connect the output directly to your load. The device can supply up to 300mA continuously.
3. Decoupling Capacitors: Place a 1μF ceramic capacitor between Vcc and GND close to the regulator for stability. An additional 1μF capacitor on the output is recommended for transient response improvement.
4. Thermal Considerations: The device has internal thermal protection, but ensure adequate heat dissipation if operating at higher currents or in high ambient temperatures.
5. Load and Line Transients: The regulator maintains good line and load regulation within specified limits; avoid rapid changes in load to prevent output transients.
6. Ripple Rejection: For optimal performance in noisy environments, take advantage of its ripple rejection capabilities by ensuring proper bypassing and filtering of the input supply.

(For reference only)