Details
BUY MIP2E9DMY https://www.utsource.net/itm/p/9823557.html
| Parameter | Description |
|---|---|
| Part Number | MIP2E9DMY |
| Type | MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) |
| Configuration | N-Channel |
| VDS (V) | 60 |
| VGS (V) | ±20 |
| RDS(on) (mΩ) | 4.5 (at VGS = 10V) |
| ID (A) | 32 (Pulsed), 8 (Continuous) |
| Package | TO-220 |
| Operating Temp. | -55°C to +150°C |
| Storage Temp. | -55°C to +150°C |
Instructions:
Handling Precautions:
- Handle the MOSFET with care to avoid damage from electrostatic discharge (ESD). Use anti-static wrist straps and mats.
Mounting:
- Ensure that the mounting surface is clean and free of debris.
- Apply thermal paste between the MOSFET and heatsink for optimal heat dissipation if necessary.
Soldering:
- Preheat components before soldering to prevent thermal shock.
- Use a temperature-controlled soldering iron set no higher than 300°C.
- Do not exceed 10 seconds per solder joint to avoid damaging the device.
Electrical Connections:
- Verify all connections are correct before applying power.
- Ensure proper isolation between the gate, source, and drain terminals to prevent short circuits.
Testing:
- Test the MOSFET in a controlled environment to ensure it operates within specified parameters.
- Monitor the temperature during operation to ensure it does not exceed the maximum operating temperature.
Storage:
- Store in original packaging in a cool, dry place away from direct sunlight.
- Keep in an ESD protective bag when not in use.
View more about MIP2E9DMY on main site