Details

---

BUY M67157 https://www.utsource.net/itm/p/9826408.html

Parameter	Description	Value	Unit
Part Number	Device Part Number	M67157	-
Operating Voltage	Supply Voltage Range	2.7 to 5.5	V
Operating Current	Typical Operating Current	0.1	mA
Output Type	Logic Output Type	Open Drain	-
Interface	Communication Interface	I2C	-
Temperature Range	Operating Ambient Temperature Range	-40 to 85	°C
Package Type	Component Package Type	SOP-8	-

Instructions for M67157

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the operating voltage range (2.7V to 5.5V).
   • Ensure the GND pin is connected to the system ground.

2. Communication Setup:

   • Configure the I2C communication lines (SDA and SCL) according to your system's I2C protocol.
   • Pull-up resistors on SDA and SCL lines are required, typically in the range of 4.7kΩ to 10kΩ.

3. Output Handling:

   • The device uses an open-drain output type; ensure external pull-up resistors are used on output lines if necessary.

4. Operating Environment:

   • Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.

5. Installation:

   • Install the device in an SOP-8 package using standard surface mount technology procedures.

6. Programming:

   • Refer to the specific datasheet or application note for detailed programming instructions and register settings.

For more detailed information, refer to the manufacturer's datasheet or technical documentation for the M67157.

(For reference only)