Details

---

BUY L7915V https://www.utsource.net/itm/p/9836444.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Output Voltage	Vout			15		V
Input Voltage Range	Vin		16.5		30	V
Maximum Output Current	Iout	Continuous		1.0		A
Dropout Voltage	Vdo	Iout = 1.0A		2.0		V
Quiescent Current	IQ	Iout = 0A		8		mA
Thermal Shutdown	TSD			160		°C
Protection Diodes		Line and load	Yes

Instructions for Using L7915V

1. Power Supply Connection:

   • Connect the input voltage to the "IN" pin.
   • Ensure the input voltage is within the specified range (16.5V to 30V).

2. Output Configuration:

   • Connect the output load to the "OUT" pin.
   • The regulator provides a stable 15V output.

3. Grounding:

   • Connect the "GND" pin to the common ground of your circuit.

4. Capacitors:

   • Place a 0.33 μF capacitor between the input and ground to improve transient response.
   • Optionally, place a 0.1 μF capacitor between the output and ground to enhance stability.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near maximum current or in high ambient temperatures.
   • The device has thermal shutdown protection which activates at approximately 160°C.

6. Protection:

   • The L7915V includes internal protection diodes for line and load transients.

7. Maximum Ratings:

   • Do not exceed the maximum ratings for input voltage, output current, and temperature to avoid damage to the device.

8. Handling Precautions:

   • Handle with care to prevent electrostatic discharge (ESD) damage.
   • Follow standard ESD precautions when soldering or handling the component.

(For reference only)