Details

---

BUY TLV9002IDR https://www.utsource.net/itm/p/9898929.html
IC OPAMP GP 2 CIRCUIT 8SOIC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Continuous Mode	1.8	-	5.5	V
Quiescent Current	IQ	Per Amplifier, VCC=3V	-	200	-	μA
Input Offset Voltage	VIO	VCC=3V	-	2	-	mV
Input Bias Current	IB	VCC=3V	-	1	-	pA
Slew Rate	SR	VCC=3V	-	2	-	V/μs
Bandwidth	BW	VCC=3V, G=+1	-	1.4	-	MHz
Large Signal Voltage Gain	AV	VCC=3V, RL=10kΩ	-	160	-	dB

Instructions for Use:

1. Power Supply:

   • Operate the TLV9002IDR within the specified supply voltage range (1.8V to 5.5V) to ensure reliable operation.

2. Biasing and Input Signals:

   • Ensure input signals do not exceed the supply rails to prevent damage or unreliable performance.
   • Keep input bias current considerations in mind when designing circuits, especially with high impedance sources.

3. Stability and Compensation:

   • The TLV9002IDR is unity-gain stable. No external compensation is required for most applications.
   • For optimal performance, use capacitive loads up to 100pF without additional compensation.

4. Operating Temperature Range:

   • The device is rated for industrial temperature ranges (-40°C to +125°C).

5. Handling Precautions:

   • Follow proper ESD handling procedures to avoid damaging the device.
   • Avoid exposing the device to excessive heat during soldering or rework operations.

6. Application Notes:

   • Refer to the datasheet application notes for detailed information on specific circuit configurations and troubleshooting tips.

(For reference only)