Details

---

BUY 74HC1G08GW,125 https://www.utsource.net/itm/p/9901055.html
IC GATE AND 1CH 2-INP 5TSSOP

Parameter	Description	Value	Unit
Supply Voltage (VCC)	Recommended operating supply voltage	2.0 to 6.0	V
Input Voltage (VIH)	High-level input voltage	70% of VCC	V
Input Voltage (VIL)	Low-level input voltage	30% of VCC	V
Output Voltage (VOH)	High-level output voltage	VCC - 0.1	V
Output Voltage (VOL)	Low-level output voltage	0.1	V
Propagation Delay	Time delay from input to output	8	ns
Power Consumption	Quiescent current at no load	1	μA
Operating Temperature	Temperature range for operation	-40 to +85	°C

Instructions for Use:

1. Power Supply Connection: Connect the VCC pin to a power supply within the recommended range of 2.0V to 6.0V, and connect the GND pin to ground.
2. Input Signals: Ensure that input signals do not exceed the supply voltage or go below ground level. Inputs should be within the specified VIH and VIL levels relative to VCC.
3. Output Handling: Outputs can drive TTL and CMOS logic families. Ensure loads are within the maximum current ratings.
4. Propagation Delay Consideration: Account for an 8ns propagation delay in timing designs.
5. Temperature Range: The device is designed to operate within an ambient temperature range of -40°C to +85°C.
6. Decoupling Capacitors: Place decoupling capacitors close to the VCC and GND pins to minimize noise and improve stability.

Note: Always refer to the manufacturer's datasheet for detailed specifications and additional guidelines.

(For reference only)