Details

---

BUY DS35-08A https://www.utsource.net/itm/p/10079857.html

Parameter	Description	DS35-08A Specifications
Part Number	Identifies the specific model of the device	DS35-08A
Type	Category of the component	Relay
Pole Configuration	Number of poles and throw configuration	SPDT
Coil Voltage	Voltage required to activate the relay coil	5V, 12V, 24V DC
Coil Resistance	Resistance of the relay coil	Varies with coil voltage
Contact Form	Type of contacts (Form A, B, C)	Form C
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Insulation Voltage	Voltage at which insulation fails	1000V AC RMS
Operating Temperature	Temperature range for reliable operation	-40°C to +85°C
Storage Temperature	Temperature range for storage	-40°C to +125°C
Mechanical Life	Number of operations before mechanical failure	10 million cycles
Electrical Life	Number of operations before electrical failure	100,000 cycles
Weight	Weight of the component	7.5g

Instructions for Use:

1. Installation: Ensure that the relay is installed in a location that maintains the operating temperature range.
2. Coil Connection: Connect the coil terminals to the appropriate voltage source as specified by the coil voltage parameter.
3. Contact Wiring: Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.
4. Handling: Handle with care to avoid damage to the relay contacts or coil.
5. Testing: Before installation into a final product, test the relay under actual load conditions to ensure proper operation.
6. Maintenance: No regular maintenance is required; however, inspect periodically for signs of wear or damage.

For detailed datasheets and more information, refer to the manufacturer's official documentation.

(For reference only)