Details

---

BUY CM10MDL-24H https://www.utsource.net/itm/p/10083400.html

Parameter	Description	Value
Part Number	CM10MDL-24H
Type	Electromagnetic Relay
Coil Voltage	Rated operating voltage of the coil	24V DC
Coil Power	Power consumption of the coil	1.3W
Contact Form	Configuration of relay contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Insulation Resistance	Resistance between contacts and coil	>100MΩ
Operating Temperature	Temperature range for operation	-40°C to 85°C
Storage Temperature	Temperature range for storage	-40°C to 85°C
Weight	Weight of the component	50g

Instructions:

1. Installation: Ensure the relay is mounted on a flat, stable surface. Use the mounting holes provided for secure attachment.
2. Wiring: Connect the coil terminals to the appropriate power supply matching the coil voltage. Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.
3. Operation: Apply the rated coil voltage to energize the relay. The normally open contact will close, and the normally closed contact will open when the coil is energized.
4. Maintenance: Regularly inspect the relay for signs of wear or damage. Ensure connections are tight and free from corrosion.
5. Safety: Do not exceed the contact ratings to prevent damage or failure. Operate within the specified temperature ranges to ensure reliable performance.

(For reference only)