Details

---

BUY TMS320F28335PTPQ https://www.utsource.net/itm/p/10256234.html

Parameter	Description	Value/Options
Device	Digital Signal Controller	TMS320F28335PTPQ
Package Type	Package Style	TQFP (Thin Quad Flatpack)
Pin Count	Number of Pins	144
Core	Processor Core	C28x
Clock Speed	Maximum Clock Frequency	150 MHz
Flash Memory	On-chip Flash Memory Size	128 KB
RAM	On-chip RAM Size	18 KB
ADC Channels	Analog-to-Digital Converter Channels	16 channels
PWM Channels	Pulse Width Modulation Channels	6 fully independent ePWM modules
Communication Interfaces	Available Communication Interfaces	SPI, I2C, SCI, CAN, LIN
Operating Temperature	Operating Temperature Range	-40°C to 105°C
Supply Voltage	Supply Voltage Range	3.0V to 3.6V
I/O Voltage	Input/Output Voltage Levels	3.3V
Capacitive Touch	Capacitive Touch Inputs	Supported
Timer	General Purpose Timers	6 x 16-bit timers

Instructions for Use

1. Power Supply Setup:

   • Ensure the supply voltage is within the specified range (3.0V to 3.6V).
   • Connect a stable power source to the VDD and GND pins.

2. Clock Configuration:

   • Configure the clock settings in your code to match the desired operating frequency up to 150 MHz.
   • Utilize the internal oscillator or external crystal as needed.

3. Memory Initialization:

   • Initialize flash memory and RAM according to your application requirements.
   • Load firmware into flash memory using appropriate programming tools.

4. Peripheral Configuration:

   • Configure ADC, PWM, and communication interfaces (SPI, I2C, SCI, CAN, LIN) based on your application needs.
   • Set up timer modules for timing control and signal generation.

5. Programming Environment:

   • Use Code Composer Studio (CCS) or other compatible IDEs for writing and debugging code.
   • Refer to the device-specific libraries and examples provided by Texas Instruments.

6. Testing and Debugging:

   • Test each peripheral and functionality individually to ensure correct configuration.
   • Use debugging tools available in CCS for troubleshooting and optimization.

7. Safety and Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Follow recommended guidelines for PCB layout and component placement.

For detailed specifications and advanced configurations, refer to the official datasheet and user guides provided by Texas Instruments.

(For reference only)