Details

---

BUY LV25-P/SP5 https://www.utsource.net/itm/p/10256247.html

Parameter	Description	Value
Part Number	Full part identification	LV25-P/SP5
Type	Type of device	Optical Encoder
Resolution	Number of pulses per revolution	25 cycles/rev
Output Type	Type of output signal	Push-pull
Supply Voltage	Operating voltage range	4.75 to 5.25 VDC
Current Consumption	Max current consumption during operation	10 mA
Operating Temperature	Temperature range for operation	-25°C to +85°C
Storage Temperature	Temperature range for storage	-40°C to +100°C
Shaft Diameter	Diameter of the shaft	5 mm
Shaft Length	Length of the shaft	10 mm
Weight	Weight of the encoder	20 g

Instructions:

1. Installation:

   • Ensure the shaft diameter and length are compatible with your application.
   • Secure the encoder in place, ensuring it is aligned properly.

2. Electrical Connections:

   • Connect the supply voltage within the specified range (4.75 to 5.25 VDC).
   • Connect the output lines to your control system according to the push-pull configuration.

3. Operation:

   • Power the encoder within the operating temperature range (-25°C to +85°C) for optimal performance.
   • Monitor current consumption to ensure it does not exceed 10 mA.

4. Maintenance:

   • Store the encoder in a dry environment within the storage temperature range (-40°C to +100°C) when not in use.
   • Periodically check connections and mounting to ensure they remain secure.

5. Handling:

   • Handle with care to avoid damage to the shaft or internal components.
   • Avoid exposing the encoder to excessive shock or vibration.

(For reference only)