Details

---

BUY AK6480AF-E1 https://www.utsource.net/itm/p/11199963.html
You deserve it

Parameter	Description
Part Number	AK6480AF-E1
Function	High-speed USB 3.1 Gen 1 (5Gbps) redriver IC
Package Type	QFN-16
Operating Voltage	1.8V ± 5%
Operating Temperature	-40°C to +85°C
Data Rate	Up to 5Gbps
Supply Current	90mA (Typical)
ESD Protection	±8kV HBM, ±1kV MM
Input Impedance	100Ω ± 10%
Output Impedance	100Ω ± 10%
PSRR	30dB (10kHz to 1MHz)
Propagation Delay	0.2ns (Typical)

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range of 1.8V ± 5%. Use appropriate decoupling capacitors close to the power pins.
2. Layout Considerations: Maintain controlled impedance traces for signal lines to match the input and output impedances. Keep signal paths as short as possible to minimize reflections.
3. Grounding: Adequate grounding is crucial. Use a solid ground plane under the device and ensure good thermal connections.
4. Signal Integrity: To maintain signal integrity, avoid sharp bends in high-speed signal traces and use differential pairs for USB data lines.
5. ESD Handling: Handle with care to avoid ESD damage. Follow standard ESD handling procedures during assembly and testing.
6. Testing: Verify functionality using a USB compliance test setup. Confirm proper operation at both minimum and maximum operating temperatures.

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)