Details

---

BUY CSC31101CP https://www.utsource.net/itm/p/11202150.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7		5.5	V	Operating supply voltage range
Output Current	IO		1.5	3.0	A	Continuous output current
Efficiency	η		92		%	Typical efficiency at nominal conditions
Switching Frequency	fSW		650		kHz	Switching frequency
Input Voltage Range	VIN	4.5		40	V	Input voltage operating range
Output Voltage Range	VOUT	0.8		18	V	Adjustable output voltage range
Quiescent Current	IQ		60		μA	Quiescent current
Shutdown Current	ISD		1		μA	Shutdown mode supply current

Instructions for Use:

1. Power Supply Connection: Connect the input power supply within the specified VIN range to the VIN pin and ensure a proper ground connection.
2. Output Configuration: Set the desired output voltage using external resistors if adjustable output is required. Ensure the output load does not exceed the maximum continuous output current.
3. Efficiency Consideration: For optimal efficiency, operate within the typical efficiency parameters under nominal conditions.
4. Thermal Management: Ensure adequate heat dissipation, especially when operating near the maximum output current or in high ambient temperatures.
5. Switching Frequency Setting: The switching frequency is fixed at 650 kHz; verify that this frequency does not interfere with other components in your design.
6. Quiescent and Shutdown Modes: In low-power modes, monitor quiescent and shutdown currents to manage overall system power consumption effectively.

Note: Always refer to the manufacturer's datasheet for detailed specifications and application notes specific to your use case.

(For reference only)