Details

---

BUY TDA1016/N4 https://www.utsource.net/itm/p/11243039.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	10		40	V	Operating voltage range
Output Current	Iout		50	100	mA	Maximum output current
Quiescent Current	Iq		10	20	mA	Current consumption in standby mode
Frequency Response	fR		20	100	kHz	Range of frequency response
Signal-to-Noise Ratio	SNR		70	80	dB	Signal-to-noise ratio at specified conditions
THD+N	THD		0.1	1	%	Total harmonic distortion plus noise
Temperature Range	Toper	-40		85	°C	Operating temperature range

Instructions for TDA1016/N4

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to pin Vcc and the negative terminal to GND.
   • Ensure the supply voltage is within the range of 10V to 40V.

2. Input Connection:

   • Connect the input signal to the designated input pin (usually marked as IN or similar).

3. Output Configuration:

   • The output can drive loads up to 100mA. Connect your load between the output pin and ground.

4. Heat Dissipation:

   • For applications where the device will be operating near its maximum ratings, consider using a heat sink.

5. Operating Temperature:

   • Ensure the ambient temperature does not exceed 85°C and does not drop below -40°C.

6. Signal Quality:

   • To maintain optimal signal quality, keep the signal-to-noise ratio within the specified limits by avoiding noisy environments and using appropriate shielding.

7. Installation:

   • Follow standard electronic installation practices, ensuring all connections are secure and insulated as necessary.

8. Testing:

   • After installation, test the device under typical operating conditions to ensure it meets the performance specifications outlined above.

Note: Always refer to the manufacturer's datasheet for detailed specifications and application notes.

(For reference only)