Details

---

BUY SII6131CNUCTR https://www.utsource.net/itm/p/11528214.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7		5.5	V
Operating Temperature	TOPR		-40		85	°C
Storage Temperature	TSTG		-65		150	°C
Input Voltage (High)	VIH	VCC = 5.5V	3.5			V
Input Voltage (Low)	VIL	VCC = 2.7V			0.8	V
Output Voltage (High)	VOH	IO = -1mA, VCC = 5.5V	4.5			V
Output Voltage (Low)	VOL	IO = 1mA, VCC = 2.7V			0.4	V
Propagation Delay Time	tpd	VCC = 5.5V, TA = 25°C		5		ns
Power Consumption Current	ICC	VCC = 5.5V, No Load		1		μA

Instructions for SII6131CNUCTR

1. Power Supply Connection: Ensure the supply voltage (VCC) is within the operating range of 2.7V to 5.5V. Connect a stable power source to avoid fluctuations that could affect performance.

2. Temperature Considerations: The device operates optimally within -40°C to 85°C. Store the device between -65°C and 150°C when not in use.

3. Input Signal Levels:

   • For high input signals, ensure the voltage is at least 3.5V when VCC is 5.5V.
   • For low input signals, keep the voltage below 0.8V when VCC is 2.7V.

4. Output Signal Levels:

   • High output voltage should be at least 4.5V under a load current of -1mA and VCC of 5.5V.
   • Low output voltage should not exceed 0.4V under a load current of 1mA and VCC of 2.7V.

5. Propagation Delay: Expect a typical propagation delay of 5ns at room temperature with a supply voltage of 5.5V.

6. Current Consumption: The device consumes approximately 1μA under no-load conditions at a supply voltage of 5.5V.

7. Handling Precautions: Use appropriate ESD protection when handling the device to prevent damage from static electricity.

8. Mounting and PCB Design: Follow standard surface mount technology (SMT) guidelines for mounting. Ensure adequate clearance and proper thermal management if operating near the upper temperature limits.

(For reference only)