Details

---

BUY AR9283-AL1A https://www.utsource.net/itm/p/11541102.html

Parameter	Description
Part Number	AR9283-AL1A
Type	RF Transceiver
Frequency Range	2.4 GHz to 2.5 GHz
Interface	SPI, SDIO
Output Power	Up to 17 dBm
Sensitivity	-96 dBm at 1 Mbps
Supply Voltage	2.3 V to 3.6 V
Operating Temperature	-40°C to +85°C
Package Type	LGA (Land Grid Array)
Dimensions	8 mm x 8 mm

Instructions:

1. Power Supply Requirements: Ensure the supply voltage is within the specified range of 2.3 V to 3.6 V to prevent damage to the device.
2. Installation: Mount the AR9283-AL1A on a PCB using standard surface mount technology. Pay attention to the orientation and alignment as indicated in the datasheet diagrams.
3. Configuration: Use either SPI or SDIO interfaces for configuring the transceiver settings. Refer to the programming guide provided in the datasheet for detailed register configurations.
4. Antenna Connection: Connect an appropriate antenna that matches the frequency range of operation. Ensure proper impedance matching to achieve optimal performance.
5. Operating Environment: Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
6. Testing: After installation, perform initial tests to verify correct functionality, including signal strength and data transmission accuracy.

For more detailed specifications and advanced configuration options, refer to the full datasheet available from the manufacturer.

(For reference only)