Details

---

BUY SI4686DY https://www.utsource.net/itm/p/11762039.html

Parameter	Description	Value	Unit
Operating Voltage	Supply voltage range for the device	1.8 to 3.6	V
Operating Temperature	Range of temperatures in which the device can operate	-40 to +85	°C
RF Input Power	Maximum RF input power	+20	dBm
Sensitivity	Minimum signal level required for satisfactory performance	-107.5	dBuV
Image Rejection	Ability to reject unwanted signals at the image frequency	>45	dB
Adjacent Channel Rejection	Rejection of adjacent channel interference	>70	dB
IF Output Level	Intermediate Frequency output level	Variable	dBuV
Audio Output Power	Maximum audio output power	10	mW
Audio SNR	Signal-to-Noise Ratio of the audio output	55	dB
Package Type	Type of packaging	QFN (Quad Flat No-leads)
Pin Count	Number of pins	40

Instructions for SI4686DY:

1. Power Supply:

   • Ensure the supply voltage is within the specified operating range of 1.8V to 3.6V.
   • Use appropriate decoupling capacitors close to the power supply pins to minimize noise.

2. Installation and Handling:

   • Handle the device with care to avoid static damage. Use anti-static precautions.
   • Follow the manufacturer’s guidelines for soldering and mounting to ensure reliable operation.

3. RF Input Connection:

   • Connect the RF input through a suitable matching network to optimize performance.
   • Shield the RF input line to prevent interference.

4. Audio Output Configuration:

   • Adjust the audio output settings according to the requirements of your application.
   • Use external components as recommended by the datasheet to achieve desired audio quality.

5. Operating Environment:

   • Operate the device within the specified temperature range to avoid thermal stress.
   • Provide adequate ventilation or cooling if operating in high-temperature environments.

6. Firmware and Configuration:

   • Load the appropriate firmware into the device using the provided programming interface.
   • Configure operational parameters via I2C or SPI interfaces as per the application needs.

7. Testing and Validation:

   • After installation, perform initial tests to verify correct operation.
   • Regularly validate performance parameters to ensure ongoing reliability.

For detailed specifications and advanced configurations, refer to the official datasheet and application notes provided by Silicon Labs.

(For reference only)