Details

---

BUY UPC7805AHF-AZ https://www.utsource.net/itm/p/11893243.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VI		7		30	V
Output Voltage	VO	No load		5.0		V
Output Current	IO	Continuous		1.0		A
Quiescent Current	IQ	Output loaded		5	8	mA
Dropout Voltage	VD	IOUT = 1A		2.0		V
Line Regulation		VIN = 7V to 30V, IOUT = 0.5A		4		mV
Load Regulation		VIN = 30V, IOUT = 0 to 1A		100		mV
Ripple Rejection		f = 120Hz, IOUT = 0.1A		60		dB
Operating Temperature	TJ		-40		125	°C
Storage Temperature	TSTG		-65		150	°C

Instructions for UPC7805AHF-AZ:

1. Mounting and Orientation:

   • Ensure the component is mounted correctly on the PCB with proper orientation. The pin configuration should be verified before soldering.

2. Input Capacitor:

   • Place a 0.33 μF capacitor between the input and ground as close to the device as possible to ensure stability.

3. Output Capacitor:

   • Use a 0.1 μF capacitor between the output and ground near the regulator to minimize output noise.

4. Heat Dissipation:

   • For applications where the regulator dissipates significant power, consider using a heat sink or ensuring adequate airflow.

5. Voltage and Current Limits:

   • Do not exceed the maximum input voltage of 30V or the continuous output current of 1A to prevent damage to the device.

6. Operating Temperature:

   • Ensure that the operating temperature does not exceed 125°C. If necessary, implement thermal management techniques such as heatsinks or fans.

7. Storage:

   • Store in a dry place within the temperature range of -65°C to 150°C when not in use.

8. Handling:

   • Handle with care to avoid physical damage. Follow anti-static precautions to prevent ESD damage.

(For reference only)